ASI SI Series Surface Insensitive Cyanoacrylate Super Glue Adhesive Systems, Inc.

About the ASI SI Series Surface Insensitive Cyanoacrylate

ASI SI Series Cyanoacrylate is a super glue used in applications that require fast cure speeds. The SI Series super glue is perfect for bonding difficult substrates, acidic surfaces, wood, PVC and substrates that contain plasticizers like certain types of EPDM, etc. 

The SI Series super glue from ASI is the go-to super glue for most applications where a strong, permanent bond and fast set times are required. 

Benefits of the ASI SI Series Cyanoacrylates

• Bonds almost any substrate
• Faster than most super glues
• Single component (no mixing or nozzles required)
• Cures at room temperature
• Good for bonding most substrates
• Fast cure time
• Dispensing can be automated
• Long term bonds
• Economical
• Meets most military (MilSpec) standards
• Can replace heavy mechanical fasteners

Compare ASI SI 5 to

• 3M PRODUCTS™ CA-40
• ARON ALPHA™ 221 / 221F
• CHEMENCE™ SI-5
• HENKEL™ 8300
• HERNON™ 108
• LOCTITE™ 406
• PACER™ RX-5,
• PERMABOND™ 790

Compare ASI SI 30 to

• ARON ALPHA™ 231F
• CHEMENCE™ SI 50
• HERNON™ 124
• PACER™ RX 50
• PERMABOND™ 791

Compare ASI SI 120 to

• ARON ALPHA™ 232 / 202F
• CHEMENCE™ SI 100
• HERNON™ 135
• LOCTITE™ 401
• PACER™ RX 100
• PERMABOND™ 792

Compare ASI SI 500 to

• 3 BOND™ 1786
• ARON ALPHA™ 252F /282F
• BOSTIK™ 7433
• CHEMENCE™ SI 600
• CIBA-GEIGY™ C – 11
• HERNON™ 134
• LOCTITE™ 447
• LORD™ R
• PACER™ RX 500
• PERMABOND™ 795

Compare ASI SI 1500 to

• CHEMENCE™ SI 1500
• PACER™ RX 700
• PERMABOND™ 798

Compare ASI SI 2000 to

• PERMABOND™ 799LV

Compare ASI SI 4000 to

• ARON ALPHA™ 253TX
• PERMABOND™ 799

Compare ASI SI GEL to

• CHEMENCE™ SI GEL
• HERNON™ 138
• LOCTITE™ 454

* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.

ASI SI Series Surface Insensitive Cyanoacrylate Specifications

• Color: Clear
• Viscosity: 120 cps
• Specific Gravity: 1.05
• Base: Modified Ethyl

ASI SI Series Chemical and Solvent Resistance

Percent of Strength Retained After Aging for 500 Hours

• GASOLINE @ 220C: 100%
• ISOPROPANOL @ 220C: 100%
• ETHANOL @ 220C: 100%
• FREON TA @ 220C% 100%
• MOTOR OIL @ 400C% 100%
• POLYCARBONATE 400C @ 95% RH 100%

ASI SI Series Cure Time and Bond Strength By Substrate

• Steel < 10 Seconds > 2100 psi
• Aluminum < 10 Seconds > 1750 psi
• Neoprene < 5 Seconds > 750 psi
• ABS < 10 Seconds > 900 psi
• PVC < 10 Seconds > 900 psi
• Polycarbonate < 10 Seconds > 900 psi
• Phenolic < 10 Seconds > 850 psi

ASI SI Series Cyanoacrylate Specifications by Viscosity

PRODUCT	GAP FILL	VISCOSITY	STRENGTH	TEMP RANGE	CURE SPEED (FIXTURE/FULL)	MIL SPEC A 46050C
SI 5	0.002	5 cps	2800/4200	-65 to 200° F	<5 Sec/8 Hours	Type II, Class 1
SI 30	0.004	30 cps	2800/4200	-65 to 200° F	<5 Sec/8 Hours	Type II, Class 1
SI 120	0.006	120 cps	2800/4200	-65 to 200° F	<8 Sec/8 Hours	Type II, Class 2
SI 500	0.007	500 cps	2800/4200	-65 to 200° F	<8 Sec/8 Hours	Type II, Class 2
SI 1000	0.008	1,000 cps	2800/4200	-65 to 200° F	<8 Sec/8 Hours	Type II, Class 3
SI 1500	0.008	1,500 cps	2800/4200	-65 to 200° F	<8 Sec/8 Hours	Type II, Class 3
SI 2000	0.009	2,000 cps	2800/4200	-65 to 200° F	<8 Sec/8 Hours	Type II, Class 3
SI 3200	0.009	3,200 cps	2800/4200	-65 to 200° F	<10 Sec/8 Hours	Type II, Class 3
SI 5000	0.009	5,000 cps	2800/4200	-65 to 200° F	<10 Sec/8 Hours	Type II, Class 3
SI GEL	0.01	Gel	2800/4200	-65 to 200° F	<10 Sec/8 Hours	Type II, Class 3

ASI SI Series Cyanoacrylate Data Sheets

ASI SI Series Technical Data Sheets

• ASI SI 5 TDS
• ASI SI 30 TDS
• ASI SI 120 TDS
• ASI SI 500 TDS
• ASI SI 1000 TDS
• ASI SI 1500 TDS
• ASI SI 2000 TDS
• ASI SI 3200 TDS
• ASI SI 5000 TDS
• ASI SI GEL TDS

ASI SI Series Material Safety Data Sheet

• ASI SI SERIES MSDS