ASI NI M Series Low Odor Low Bloom Cyanoacrylate Super Glue Adhesive Systems, Inc.

About the ASI NI M Series Cyanoacrylate

ASI NI “M” Series Cyanoacrylate is a low odor and low bloom super glue adhesive. The NI M line eliminates frosting and odors that are sometimes associated with cyanoacrylates. The “NI” M Series bonds a wide range of similar and dissimilar substrates and gives surfaces a better cosmetic appearance.

The ASI NI M cyanoacrylate is great when the appearance of the product being bonded is important or if you are working in a small, poorly ventilated area. 

Benefits of the ASI NI-M Series Cyanoacrylates

• Low odor adhesive
• Does not frost or “bloom”
• Great for poorly ventilated work environments
• Single component (no mixing or nozzles required)
• Cures at room temperature
• Good for bonding most substrates
• Fast cure time
• Dispensing can be automated
• Long term bonds
• Economical
• Meets most military (MilSpec) standards
• Can replace heavy mechanical fasteners

ASI NI M Low Odor Low Bloom Super Glue Specifications

Properties

• Color: Clear
• Viscosity: 5 cps
• Specific Gravity: 1.05
• Base: Alkoxy

ASI NI M Series Chemical and Solvent Resistance

Percent of Strength Retained After Aging for 500 Hours

• GASOLINE @ 220C: 100%
• ISOPROPANOL @ 220C: 100%
• ETHANOL @ 220C: 1005
• FREON TA @ 220C% 100%
• MOTOR OIL @ 400C% 100%
• POLYCARBONATE 400C @ 95% RH 100%

ASI NI-M Series Cure Time and Bond Strength By Substrate

• Steel < 25 Seconds > 2100 psi
• Aluminum < 25 Seconds > 1750 psi
• Neoprene < 5 Seconds > 750 psi
• ABS < 10 Seconds > 900 psi
• PVC < 5 Seconds > 900 psi
• Polycarbonate < 10 Seconds > 900 psi
• Phenolic < 10 Seconds > 850 psi

ASI NI-M Series Cyanoacrylate Specifications by Viscosity

ASI NI-M Series Cyanoacrylate Data Sheets

ASI NI “M” Series Technical Data Sheets

• ASI NI 5M TDS
• ASI NI 100M TDS
• ASI NI 500M TDS
• ASI NI 1000M TDS

ASI NI “M” Series Safety Data Sheet

• ASI NI “M” SERIES SDS